-13%

APC Smart-UPS RT 10kVA 230V (SRTG10KXLI) - Image 2

APC Smart-UPS RT 10kVA 230V (SRTG10KXLI) - Image 3

APC Smart-UPS RT 10kVA 230V (SRTG10KXLI)

Original price was: KShs 830,000.00.Current price is: KShs 720,460.00. Add VAT

APC Smart-UPS RT 10kVA 230V (SRTG10KXLI)

10/100 BaseT Connection; RJ-45 10/100 Base-T, RJ-45 Serial, Smart-Slot, USB, Input Voltage : 230V, 400V 3PH 3:1
Nominal Output Voltage; 230V
ECO Mode; Operating mode that by-passes unused electrical components in good power conditions to achieve high operating efficiency without sacrificing protection
LCD Status Display; Provides key UPS status at a glance. Multiple status indicators with load and battery bar graphs.
Maximizes battery performance, life, and reliability through intelligent, precision charging

5 in stock

SKU: DPS2300168 Category: Office Supply Tags: APC, Office Supply, UPS Brand: APC

Description
Additional information

APC Smart-UPS RT 10kVA 230V (SRTG10KXLI)

Run time for load 10,000 W information_stroke Min-max: 1000-10000 W	3min 32s
Max. Capacity Used information_stroke	100 %
Main Input Voltage	230 V
Product or component type	Uninterruptible power supply (UPS)
Other Input Voltage	220 V 240 V
Main Output Voltage	230 V
Other Output Voltage	220 V 240 V
Rated power in W	10000 W
Rated power in VA	10000 VA
output connection type	2 IEC 60320 C13 1 IEC 60320 C19
Output connector type	Hard wire 3-wire (H N + E) 1
Number of rack unit	5U
Provided equipment	1 x USB cable 1 x RJ45 cable 2 x rack mounting brackets 2 x stabilization/wall mounting feet 2 x installation manual 1 x C13-C14 power cord 1 x external battery pack 1 x battery cable
Range of product	Smart-UPS On-Line

Batteries & Runtime
Run Time	View Runtime Graph
Efficiency	View Efficiency Graph
Battery type	Lead-acid battery
Battery voltage	+/- 96 V
Extended runtime	1
Number of battery filled slots	0
Number of battery free slots	0
Battery recharge time	4 h
Number of battery replacement quantity	2
Battery life	3…5 year(s)
Replacement battery	APCRBC174
Battery charger power	431 W rated

General
Number of power module filled slots	0
Number of power module free slots	0
Redundant	No
UPS type	Double conversion online

Physical
Colour	Black (RAL 9005)
Height	21.7 cm
Width	44 cm
Depth	68 cm
Net weight	101.5 kg
Mounting preference	No preference
Mounting mode	Rack-mounted with kit
Two post mountable	0
USB compatible	Yes
Mounting position	Horizontal

Input
Maximum input current	30 A
Max short time withstand current	40 kA
Input voltage limits	160…285 V full load 100…285 V half load
Number of input connectors	1 hard wire 3-wire (1P + N + E)
Network frequency	40…70 Hz auto-sensing

Output
Bypass type	Internal bypass (automatic and manual)
Crest factor	3 : 1
Harmonic distortion	Less than 2 %
Maximum configurable power in VA	10000 VA
Maximum configurable power in W	10000 W
Wave type	Sine wave
Efficiency	93.5 %
Output frequency	50/60 Hz +/- 4 Hz sync to mains
Additional information	Configurable for 220 : 230 or 240 nominal output voltage

Conformance
Product certifications	CE UKCA TISI
Standards	EN/IEC 62040-1:2019/A11:2021 EN/IEC 62040-2:2006/AC:2006 EN/IEC 62040-2:2018

Environmental
Acoustic level	55 dBA
Heat dissipation	2217.98 Btu/h
Operating altitude	0…3000 m
Ambient air temperature for operation	0…40 °C
Ambient air temperature for storage	-15…45 °C
Storage altitude	0…15000 m
IP degree of protection	IP20
Relative humidity	0…95 % non-condensing
Storage Relative Humidity	0…95 % non-condensing

Communications & Management
Emergency power off	Yes
Preinstalled device	Network management card 3 with environmental monitoring
Alarm	Alarm when on battery : distinctive low battery alarm : overload continuous tone alarm